SCRUBBING

The panel is washed with soap water/water and scrubbed with a microfibre cloth in order to remove any deposits.

Base Coat

First base coat: It is sprayed on the panel and the color is matched by the color code of the OEM. Second base coat: This is applied after the first base coat in order to get a perfect color match with respect to the color code & fade of the colour.

Masking

Removal/Masking of badges, clips, door handles and indicators so that primer/paint is not sprayed on accidentally.

Sanding

It is done to allow the primer & paint to stick to the panel. This is usually followed by applying the filler (putty or PoP) so as to get the right line, level & smoothness for the the panel.

APPLYING LACQUER

Finally a layer of clear coat or lacquer is applied so as to give the shine to the panel & make it appear uniform like the other panels. This coat is also a sealant and protects the paint from minor damage like superficial scratches etc.

MASK REMOVAL

Once the lacquering is done, the areas that were masked are now removed.

Drying Treatment

Drying Treatment is done with high powered lights in order to speed up the process and ensure consistency

Primer

The first coat which is applied, the purpose of which is to allow for the paint to stick to the panel. It is usually mixed with a thinner according to the ratio specified by the OEM & paint manufacturer.

Final

Finally a layer of polish is applied to the panel in order to have it looking as good as new. Sometimes polishing is also done after a period of a week